Detailed steps of heat treatment after forging of titanium alloy bolts:
Purpose of heat treatment
1. Improve the mechanical properties of bolts, increase strength, plasticity and toughness;
2. Eliminate forging stress and prevent deformation and cracks of bolts during use;
3. Adjust the organizational structure of bolts and increase their service life.
Heat treatment process
1. Preheating: Put the forged titanium alloy bolts into the furnace and heat them to the preheating temperature at a certain heating rate. The preheating temperature is generally 550℃-650℃, and the holding time is determined according to the size and shape of the bolts, generally 30-60 minutes. Preheating can reduce the temperature difference between the inside and outside of the bolts, reduce the stress during the heat treatment process, and prevent cracks.
2. Solution treatment: Continue to heat the preheated bolts to the solution temperature and keep them warm for a period of time to fully dissolve the β phase in the bolts. The solution temperature is generally 750℃-850℃, and the holding time is determined according to the size and shape of the bolts, generally 60-120 minutes. Solution treatment can eliminate forging stress and improve the plasticity and toughness of the bolts.
3. Water cooling: Put the solution treated bolts into water quickly for cooling. The faster the cooling rate, the higher the strength of the bolts. Water cool to room temperature to fix the organizational structure of the bolts.
4. Aging treatment: Put the water-cooled bolts into the furnace, heat them to the aging temperature, and keep them warm for a period of time to precipitate the β phase in the bolts and improve their strength. The aging temperature is generally 450℃-550℃, and the insulation time is determined according to the performance requirements of the bolts, generally 2-4 hours. Aging treatment can further improve the strength and hardness of the bolts.
5. Air cooling: Take out the aging-treated bolts and place them in the air to cool naturally to room temperature. During the air cooling process, the organizational structure and performance of the bolts gradually stabilize.
Precautions for heat treatment
1. During the heat treatment process, the temperature control should be precise and avoid being too high or too low. Too high temperature may cause the bolt to overheat and reduce the mechanical properties; too low temperature will not achieve the heat treatment effect.
2. The heating and cooling speeds should be moderate. Too fast or too slow will affect the performance of the bolt. Especially during the water cooling process, it is necessary to ensure that the bolt is cooled evenly to avoid stress concentration.
3. During the heat treatment process, the atmosphere in the furnace should be kept stable to avoid oxidation. Protective gas, such as argon, can be added to the furnace to prevent the bolt from oxidizing.
4. During the heat treatment process, pay attention to the changes in the color, size and shape of the bolt, and adjust the process parameters in time.
5. The bolts after heat treatment should be tested for performance, including tensile strength, yield strength, cross-sectional shrinkage, elongation, etc., to ensure that they meet the design requirements.
Heat treatment of titanium alloy bolts after forging can significantly improve their mechanical properties, corrosion resistance and service life. Reasonable heat treatment process and strict control of various parameters are the keys to ensuring the quality of titanium alloy bolts. Through preheating, solution treatment, water cooling, aging treatment and air cooling, the organizational structure of the bolt is optimized, providing strong support for the development of my country's aerospace, military and other fields.




